Fitment
VHC Compatible Lightsaber Parts
Corvus Saber Foundry's VHC compatible lightsaber parts have been designed to be compatible with the Nexus, LGT, and Damiensaber's Variable Hilt Component system (VHC), VHC adjacent offerings as well as a variety of Nexus/LGT retailers such as Vire Sabers, Crimson Dawn, Padawan Outpost, ES Sabers, and Fulcrum Forge, among others.
TXQ modular compatibility
Corvus Saber Foundry's aftermarket lightsaber parts also happen to be compatible with TXQ modular options as well. While TXQ has not officially named this system, independent research by many of our customers have ascertained modularity and compatibility with range of TXQ lightsaber parts are fully compatible with the LGT VHC thread pattern, inner and outer diameter. We suggest you reach out to your preferred TXQ lightsaber parts vendor to inquire about their specifications to determine fitment!
Design Controls
Efforts have been taken to make sure measurements and tolerances align as closely as possible to ensure a satisfactory experience with your lightsaber parts. While CSF parts were designed to be compatible with a majority of VHC lightsaber parts and consistent with precise manufacturing specifications, we acknowledge that not all VHC or VHC tangential parts in circulation share the same level of precision. This variance in fitment can be influenced by manufacturing tolerances, variations in material concentricity, to a thickening of the threads due to anodizing. We likewise acknowledge that variances in both CSF and non-CSF parts may cause CSF parts to perform unsatisfactorily. While CSF part tolerances are very strict, we cannot rule out the possibility that changes in VHC parts may cause this issue to resurface.
If your non-CSF parts have significant changes, damage, or thread galling, CSF parts may not perform satisfactorily. Please ensure your non-CSF part threads are clean, undamaged, and the diameter is consistent before installation. We also recommend using a dielectric grease on all raw aluminum to raw aluminum thread threading points.
If a user experiences any resistance during installation of CSF parts: the user is advised to immediately stop, remove the part if possible, and contact the CSF team for assistance. CSF cannot be liable for parts damaged by negligence or failure to heed the warning signs of impending damage.
Lightsaber Accent Rings
Corvus Saber Foundry's signature Accent Rings are designed to be compatible with a majority of VHC lightsaber parts consistent with an outer diameter of 33mm. If your lightsaber has significant changes in outer diameter in the area you wish to mount a ring, this part may fit, but may not perform satisfactorily or visually. Please measure the outer diameter of your lightsaber to verify proper fit.
Similar to shim rings, it is important to ensure your Accent Rings are seated properly on the friction surface of the receiving part of your saber. Improper installation may cause ring failure and or unsatisfactory performance of both parts.
Lightsaber Emitter and Grip Shrouds
Corvus Saber Foundry's lightsaber emitter shrouds compliment and expand on the design and mounting options available in the LGT and Nexus VHC lightsaber system, giving you wider customization options for a personalized saber. While designed primarily for compatibility with LGT and Nexus sabers, testing has shown these shrouds may fit other manufacturers of similar design, dimension, and format such as TXQ. We suggest you do your own experimentations!
Please note that these shrouds were designed to be compatible with a wide majority of VHC parts; these parts tend to maintain a consistent outer diameter of 33mm. If your saber has significant changes or variances in outer diameter in the area you wish to mount this shroud, this part may not perform satisfactorily.